Displays

Status battery powered indicators accept RTD or thermocouple temperature sensors and displays the sensor temperature in °C or °F on a 6-digit LCD display. The instrument offers an advanced display mode allowing the user to also display one or two (1 to 32) character messages. Additional to the messages, the user may select an alert event to occur when the temperature is within a band. The change-over relay can be used together with the messaging and alert to provide switching at user set switch points. In addition to this, on board datalogging is also available to record process details at up to 5000 points.

Indicator Options:

Pressure & Temperature Indicator With Data Logging, Alarm & Messaging

mA or Voltage Signal Indicator With Data Logging, Alarm & Messaging

Humidity & Temperature Indicator With Data Logging, Alarm & Messaging

Temperature Indicator (Stainless housing) With Extended Data Logging, Extended Dual Alarm & Messaging

Battery Powered Pressure & Temperature Gauge With Data Logging, Alarm & Message Display

Pressure/temperature gauge
Gauge or Absolute pressure
ABS Plastic or Stainless Steel Housing
Alarm relay, max/ min information
5000 point data logger with USB and NFC interface

The DM650PM battery-powered digital pressure gauge accepts gauge or absolute pressure and displays the gauge or absolute sensor pressure in BAR, PSI or the user’s engineering unit on a 6-digit LCD display. The instrument offers an advanced display mode allowing the user to also display one or two (1 to 32) character messages. Additional to the messages, the user may select an alert event to occur when the pressure is within a band. A change-over relay can be used together with the messaging and alerts to provide switching at user set points. In addition to this, onboard data logging is also available to record process details at up to 5000 points.

RTD / Thermocouple input Panel meter

Thermocouple or Pt100 Input
Flexible Output Configuration using Option “Pods”
Current and Relay Outputs
Galvanically Isolated Input

The panel meter for temperature accepts RTD and Thermocouple inputs and displays the process value on a high-efficiency daylight readable LED display.

The highly innovative case design features option “Pods” which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current (POD-03) and 2 x trip relays for alarm points (POD-02).

Current / Voltage input Panel meter

Current or Voltage Input
Transmitter Power Supply
Max / Min display
Flexible Output Configuration using Option “Pods” For Current and Relay Output.
Galvanically Isolated Input
User Non-Linear Feature for Tank Level Applications

Panel meter for process signals. The DM3420 panel meter accepts Voltage and Current process signals and displays the process value on a high-efficiency daylight readable LED display. A built-in transmitter power supply is also provided.

The highly innovative case design features option “Pods” which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current (POD-03) and 2 x trip relays for alarm points (POD-02).

Intelligent Panel Meter with Flow and Totalise functions

Universal Input
Flow Totaliser / Batch Functions
6 Digit Display
Programmable Relay & Current Outputs
Loop Power Supply
RS485 Comms Option

Panel meter with flow and totalise functions. The DM3600A is an intelligent digital panel meter with rate and total function that can accept inputs from a wide variety of sensors and display the signal digitally. The highly innovative case design features option “Pods” which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current (POD-03) and 2 x trip relays for alarm points (POD-02).

All functions are programmable via the integral front panel keys or via the optional RS485 serial communications port using the Modbus protocol.

Universal Intelligent Panel Meter

Universal Input
6 Digit Display
Loop Power Supply
User Non Linear Function For Tank Level Applications
Optional Programmable Relay & Current Outputs
RS485 Comms Option

The DM3600 is a universal intelligent digital panel meter that can accept inputs from a wide variety of sensors and display the signal digitally. The highly innovative case design features option “Pods” which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current (POD-03) and 2 x trip relays for alarm points (POD-02).

All functions are programmable via the integral front panel keys or via the optional RS485 serial communications port using the Modbus protocol.

Loop or Battery Powered Indicator With Data Logging, Alarm & Message Display

• (4 to 20) mA LOOP POWERED
• CAN BE USED AS A LOOP-POWERED PROCESS SWITCH
• USE ON TOP OF TEMPERATURE PROBE OR SURFACE-MOUNTED
• USB AND NFC INTERFACE
• BATTERY BACKUP
• 5000 POINT DATA LOGGER
• ABS PLASTIC, STAINLESS OR ALUMINIUM HOUSING

The DM650LP loop-powered process switch and indicator accepts a (4 to 20) mA signal and displays the process value in the appropriate engineering units on a 6-digit LCD display. The instrument offers an advanced display mode allowing the user to also display one or two (1 to 32) character messages.

The change-over relay can be used together with the messaging and alert to provide switching at user-set switch points. This means the instruments can be used as a loop-powered process switch.

In addition to this, an onboard datalog function is also available to record process details at up to 5000 points. In this case, a battery needs to be fitted so the log can continue to be monitored in case of a loop failure. 

Panel Mounted Loop Powered Indicator

• Push-button programmable
• Compact 48 x 24mm
• Loop powered
• 4 digit LED display
• IP65 front panel seal

The DM720 is a compact panel-mounted loop-powered display that is designed to connect in series with a 4/20mA current loop and display the value in engineering units.

The DM720 is housed in a 48x24mm DIN standard panel mount case and provides 10mm high LED digits. The engineering range is programmed by using easily accessible push buttons. The design of the product means no external power supply is needed and it requires less than 5V from the current loop.