Radar


Level measurement with radar

In continuous non-contact level measurement with radar, the sensor sends microwave signals towards the medium from above. The surface of the medium reflects the signals back in the direction of the sensor. Using the received microwave signals, the sensor determines the distance to the product surface and calculates the level from it.

Liquids and solids are commonly measured with this measuring technique.

Features

  • Non-contact level measurement with radar is characterized by especially high measurement accuracy
  • Measurement is not affected by temperature, pressure or dust
  • User-friendly adjustment saves time
View Product

VEGA C-21

VEGA C-21 Radar

Wired radar sensor for continuous level measurement

Axial cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval

VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement in open channels and level monitoring. In bulk solids the sensors are used in small bulk solids silos or open containers.

VEGAMET 841

  • Combine your wired sensor with the VEGAMET 841 controller:
    Feeds the connected 4 ... 20 mA sensor, processes the measured values and displays them.
    A large display for data visualisation is integrated in the housing designed for rough field conditions.
    It enables a simple conversion of pump controls, flow measurements on open channels and weirs and totalizers. With VEGAMET 841, limit values can be reliably monitored and relays can be switched, e.g. for an overfill protection

View Product

Product: C-11 Radar

Wired radar sensor for continuous level measurement

VEGAPULS C 11 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations, rain overflow basins and level monitoring. In bulk solids the sensors are used in small bulk solids silos or open containers.

Axial cable outlet, 4 ... 20 mA output, measuring range up to 8 m, accuracy ±5 mm, PVC cable with 10 m length

View Product

VEGAPULS 64

Application area

Storage tanks, dosing and process vessels with different process conditions or hygienic requirements.

The VEGAPULS 64 is a sensor for continuous level measurement of liquids. With small tanks or in case of narrow space the small process fittings offer special advantages. The very good signal focusing enables the use in vessels with many installations such as e.g. stirrers and heating spirals.

Features

Exact measuring results independent of process conditions
High plant availability, because wear and maintenance-free
Maintenance-free operation through non-contact measuring principle

Technical

Measuring-range---Distance 30m
Process-temperature---196 ... 200 °C
Process-pressure---1 ... 25 bar

View Product