\

Transmitters

Browse our sub categories

  • Transmitters

Temperature Transmitters

Transmitters convert the sensor output  to a standard industrial (4 to 20) mA transmission signal. 

The temperature range can be set by simulating a temperature at the low and high end of scale required, and pushing the button to output 4mA at the low end, and 20 mA at the high end. The advantage of this method is that you do not need to connect the product to a computer to carry out this function.
Alternatively, transmitters are available with USB interface to easily programme the sensor type, range and error signal using a laptop or PC. The user adjust function can be locked during configuration if not required. The state LED indicates out of range input during normal operation.

View Product

Temperature Sensor Complete

The Style 6 HVAC temperature probe is an immersion-style sensor for use with a compression fitting or duct plate. Designed to be low cost, the Style 6 HVAC temperature probe is available as a 2, 3 or 4 wire Pt100 or Pt1000  in simplex, duplex or triplex configuration. The accuracy class can be selected from 1/10 DIN, 1/5 DIN, 1/3 DIN, class A or class B. Thermocouple type E, type J, type K, type N or type T are also available in either simplex, duplex or triplex configuration. Thermistor sensors are also available.

Standard size probe is 6mm diameter x 150mm length

View Product

Status DM650TM Temp Gauge

Temperature Gauge With Data Logging, Alarm & Messaging

  • ACCEPTS  A  PT100  OR THERMOCOUPLE TEMPERATURE PROBE. TELL US YOUR REQUIREMENT.
  • BATTERY-POWERED
  • USB AND NFC INTERFACE
  • ALARM RELAY / USER SET-DISPLAY MESSAGES
  • 5000 POINT DATA LOGGER
  • ABS PLASTIC, STAINLESS OR ALUMINIUM HOUSING

The DM650TM digital temperature gauge accepts RTD or thermocouple temperature sensors and displays the sensor temperature in °C or °F on a 6-digit LCD display. The instrument offers an advanced display mode allowing the user to also display one or two (1 to 32) character messages. Additional to the messages, the user may select an alert event to occur when the temperature is within a band. The change-over relay can be used together with the messaging and alert to provide switching at user-set switch points. In addition to this, onboard data logging is also available to record process details at up to 5000 points.

View Product

Status SEM203P

Manual range configuration, suitable for Pt100 sensors

  • Suitable For Pt100 Sensors
  • Push Button Configuration
  • LED Over-range Indication
  • Push Button Sensor Matching
  • Vibration Tested
  • EAC Approval

The SEM203P is a push-button configurable in-head transmitter that accepts PT100 temperature sensors and
converts sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal.
A simple push-button operation allows the user to not only select the desired range and burnout direction but also
perform user trim at both (4 and 20) mA points. If required, the desired range can be specified at the time
of order, removing the need for user configuration.

The pt100 transmitter can be ordered with any of our temperature probes and connection heads. We can supply temperature probe assemblies with the temperature transmitter included.

View Product

Status SEM210 MKII

Universal, Dual Input, High Performance
  • Dual RTD, Thermocouple, Potentiometer and mV Inputs
  • UKEX, ATEX, IECEx Approved Versions For Hazardous Areas
  • Isolated Input to Output 4kV DC Flash Tested
  • Maths Functions Between Inputs
  • SIL 2 Hardware Safety Integrity

The SEM210 universal temperature transmitter accepts most commonly used Pt100, thermocouple, mV , potentiometer sensors and generates an industry standard (4 to 20) mA transmission signal. The product can be easily programmed using our free USB Speedlink software and a standard USB lead (safe area version).

Isolation is a standard feature to overcome any potential ground loop effects and a sensor referencing facility enables the transmitter to be calibrated to a particular sensor.

View Product

Status SEM310 MKII

Universal, Dual Input, High Performance HART Temperature Transmitter
  • HART 5,6,7 Compatible
  • Dual RTD, Thermocouple, Potentiometer and mV Inputs
  • UKEX, ATEX, IECEx Versions for Hazardous Areas
  • Isolated Input to Output 4kV DC Flash Tested
  • Maths Functions Between Inputs
  • SIL 2 Hardware Safety Integrity

The SEM310 HART (generic device) temperature transmitter is a universal device that accepts most commonly used Pt100, thermocouple, mV, potentiometer sensors and generates an industry-standard (4 to 20) mA transmission signal. Compatible to HART 5, 6, or 7 the product can be easily programmed using our free USB Speedlink software and a standard USB lead (safe area version). It can also be programmed via a HART communication device/system.

Isolation is a standard feature to overcome any potential ground loop effects and a sensor referencing facility enables the transmitter to be calibrated to a particular sensor.

This HART temperature transmitter has two inputs. This allows the connection of two sensors. Maths functions such as difference, average, highest, lowest, sensor redundancy (TC and mV only) are available. The math function of both inputs is then reflected in the 4 to 20mA output.

View Product

Status SEM1605/P

Pt100 Temperature Transmitter PC Programmable With Push Button Calibration
  • RTD Temperature Transmitter
  • PT100, Cu100, Cu53, Ni100, Ni120
  • (4 to 20) mA Two Wire Output
  • Calibration and Output Trim Without a PC
  • View live data on an Android phone or tablet

The SEM1605P is a rail-mounted temperature transmitter from Status Instruments. It has been designed to accept most common RTD temperature sensor inputs and provide the user with a standard two-wire (4 to 20) mA output signal. All temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1605P and your PC. Our free configuration software will guide you through any changes you wish to make. To further help save time, the SEM1605P does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

ACTIVE RANGE

The SEM1605P is a rail-mounted temperature transmitter provided with a user push button ranging option, allowing adjustments at both 4 mA and 20 mA for a live value. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out-of-range input during normal operation, during ‘user adjust’ it is also used to indicate the stage of adjustment.

(4 and 20) mA TRIM

The buttons can also be used for 4 mA and 20 mA current trim adjustment to add small offsets to (4 or 20) mA output.

View Product

Status SEM1605/TC

Thermocouple Temperature Transmitter PC Programmable With Push Button Calibration
  • Thermocouple Temperature Transmitter
  • Thermocouple Types K J E N T R S L U B C G
  • (4 to 20) mA Two Wire Output
  • USB Configuration
  • Push button Calibration Against Live Sensor Value
  • View live data on an Android phone or tablet

The SEM1605TC is a rail mount thermocouple temperature transmitter from Status Instruments. It has been designed to accept most common thermocouple sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Galvanic isolation is provided between input and output and all temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1605TC and your PC. Our free configuration software will guide you through any changes you wish to make. To further help save time, the SEM1605TC does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

ACTIVE RANGE

The SEM1605TC rail mount thermocouple temperature transmitter is provided with a user push button ranging option, allowing adjustments at both 4 mA and 20 mA for a live value. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out of range input during normal operation, during ‘user adjust’ it is also used to indicate the stage of adjustment.

(4 and 20) mA TRIM

The buttons can also be used for 4 mA and 20 mA current trim adjustment to add small offsets to (4 or 20) mA output.

View Product

Status SEM1615

Universal Dual Input Temperature Transmitter
  • Dual RTD, Thermocouple, Potentiometer and mV Inputs
  • Maths Functions Between Inputs
  • Isolated Input to Output 4kV DC Flash Tested
  • SIL Hardware Safety Integrity

HART transmitter rail mount. The SEM1615 is a universal transmitter that accepts RTD, Thermocouple, Potentiometer or millivolt input
signals and converts them to the industry standard (4 to 20) mA transmission signal. It is programmed using a standard USB lead and our free configuration software “USB Speedlink” downloaded from our web site.

The output range and other operating parameters are easily programmed using our free software and a standard USB lead. Isolation is a standard feature to overcome any potential ground loop effects and a sensor referencing facility enables the HART transmitter rail mount to be calibrated to a particular sensor.

View Product